Clean the Surface
Wipe away dirt, dust and grease from the area where the hook or suction cup will be positioned.
Door Decorating Guide
How to Hang a Heavy Wreath on a uPVC Door?
A wreath can add plenty of character to a uPVC entrance door, but heavier decorations need to be supported properly without damaging the door, frame or seals.
The safest approach is to use a suitable non-invasive fixing method that is rated for the weight of the wreath and compatible with the surface of your door.
Quick Answer
What Is the Best Way to Hang a Heavy Wreath on a uPVC Door?
Use a wreath hanger or hook that is suitable for the weight of the decoration and does not require drilling into the uPVC door.
Suction hooks can work on suitable smooth surfaces, while an over-the-door hanger may be another option if it does not interfere with the door closing correctly or compress the weather seals.
Always check the fixing manufacturer's stated weight limit before hanging a heavy wreath.
Preparation
Prepare the Door Before Hanging the Wreath
Allow It to Dry
The surface should be completely dry before installing a suction or adhesive fixing.
Heavy Wreaths
Check the Weight Before You Hang It
Heavy wreaths place considerably more load on a hook or hanger than lightweight decorations.
Check the stated maximum load of the fixing and make sure the complete wreath — including lights, decorations and batteries — is comfortably within that limit.
If the fixing moves, slips or begins pulling away from the surface, remove the wreath rather than relying on it to hold.
Positioning
How Do You Secure a Heavy Wreath?
1
Choose the Position
Decide where the wreath will sit before installing the fixing. Centre it on the door or position it slightly higher depending on the door design.
2
Install the Hanger or Hook
Follow the instructions supplied with the fixing and check that it feels secure before adding the wreath.
3
Attach the Wreath
Hang the wreath securely from its frame or hanging point. Ribbon can also be used where it is appropriate for the chosen hanger.
4
Test the Door
Open, close and lock the door normally to make sure the wreath and fixing do not interfere with its operation.
Avoid Damage
What Should You Avoid on a uPVC Door?
Drilling Without Guidance
Avoid drilling or screwing directly into the door unless the door manufacturer or installer confirms that the fixing method is suitable.
Unrated Adhesives
Do not assume that strong tape or adhesive is safe for the door finish. It may leave residue or damage the surface when removed.
Obstructing the Door
Make sure decorations do not affect the lock, handle, hinges, weather seals or the ability of the door to close properly.
Outdoor Conditions
How Do You Stop a Wreath Moving in the Wind?
Outdoor wreaths can move considerably in windy weather, particularly when they have a large diameter or lots of lightweight decorations.
Use a fixing rated comfortably above the weight of the wreath and periodically check that it remains secure.
Avoid adding extra weights simply to stop movement, as this increases the load placed on the hanger or hook.
After the Season
How Should You Remove the Wreath?
Remove the wreath first so there is no weight on the fixing, then remove the hanger, suction cup or removable hook according to the manufacturer's instructions.
Check the door afterwards and gently clean any marks or residue using an appropriate uPVC cleaning method.
Common Questions
Hanging a Wreath on a uPVC Door FAQs
Can you hang a heavy wreath on a uPVC door?
Yes, provided you use a suitable fixing that can safely support the complete weight of the wreath without damaging or interfering with the door.
Do suction hooks work on uPVC doors?
They can work on suitable smooth surfaces, provided the hook is designed for the required weight and is installed according to the manufacturer's instructions.
Can I use an over-the-door wreath hanger?
It may be suitable if there is enough clearance and the hanger does not prevent the door from closing correctly or interfere with the weather seals.
Can I screw a wreath hook into a uPVC door?
Avoid drilling or screwing into the door without checking with the door manufacturer or installer first, as permanent alterations can damage the door and may affect warranty cover.
Can adhesive hooks damage uPVC?
Some adhesives may leave residue or affect certain surface finishes. Check that the product is suitable for the door surface before use.
Thinking About a New Entrance Door?
Explore our range of uPVC and other entrance doors designed to suit homes across the North West.
